diff -uNr GMT3.4.2.orig/man/manl/grdbarb.l GMT3.4.2/man/manl/grdbarb.l
--- GMT3.4.2.orig/man/manl/grdbarb.l	Thu Jan  1 09:00:00 1970
+++ GMT3.4.2/man/manl/grdbarb.l	Thu Feb 13 18:00:03 2003
@@ -0,0 +1,185 @@
+.TH GRDVECTOR l "1 Mar 2002"
+.SH NAME
+grdbarb \- Plot wind barb fields from grdfiles
+.SH SYNOPSIS
+\fBgrdbarb\fP \fIcompx.grd\fP \fIcompy.grd\fP \fB\-J\fP\fIparameters\fP [ \fB\-A\fP ]
+[ \fB\-B\fP\fItickinfo\fP ] [ \fB\-E\fP ]
+[ \fB\-I\fP\fIx_inc\fP[\fBm|c\fP][/\fIy_inc\fP[\fBm|c\fP]] ] [ \fB\-K\fP ] [ \fB\-N\fP ] [ \fB\-O\fP ] [ \fB\-P\fP ]
+[ \fB\-Q\fP\fIparameters\fP ] [ \fB\-R\fP\fIwest/east/south/north\fP[\fBr\fP] ]
+[ \fB\-T\fP ] [ \fB\-U\fP[\fI/dx/dy/\fP][\fIlabel\fP] ] [ \fB\-V\fP ] [ \fB\-W\fP\fIcontourpen\fP ] [ \fB\-X\fP\fIx-shift\fP ]
+[ \fB\-Y\fP\fIy-shift\fP ] [ \fB\-Z\fP ] [ \fB\-c\fP\fIcopies\fP ]
+.SH DESCRIPTION
+\fBgrdbarb\fP reads two 2-D gridded files which represents the x- and y-components of a vector field and
+produces a wind barb field plot by
+drawing barbs with orientation and length according to the information in the files. Alternatively,
+polar coordinate components may be used (r, theta).
+.TP
+\fIcompx.grd\fP
+Contains the x-component of the vector field.
+.TP
+\fIcompy.grd\fP
+Contains the y-component of the vector field.
+.TP
+.B \-J
+Selects the map projection. Scale is UNIT/degree, 1:xxxxx, or width in UNIT (upper case modifier).
+UNIT is cm, inch, or m, depending on the MEASURE_UNIT setting in .gmtdefaults, but this can be
+overridden on the command line by appending the c, i, or m to the scale/width value.
+.br
+.sp
+\fBCYLINDRICAL PROJECTIONS:\fP
+.br
+.sp
+\fB\-Jc\fP\fIlon0/lat0/scale\fP (Cassini)
+.br
+\fB\-Jj\fP\fIlon0/scale\fP (Miller)
+.br
+\fB\-Jm\fP\fIscale\fP (Mercator - Greenwich and Equator as origin)
+.br
+\fB\-Jm\fP\fIlon0/lat0/scale\fP (Mercator - Give meridian and standard parallel)
+.br
+\fB\-Joa\fP\fIlon0/lat0/azimuth/scale\fP (Oblique Mercator - point and azimuth)
+.br
+\fB\-Job\fP\fIlon0/lat0/lon1/lat1/scale\fP (Oblique Mercator - two points)
+.br
+\fB\-Joc\fP\fIlon0/lat0/lonp/latp/scale\fP (Oblique Mercator - point and pole)
+.br
+\fB\-Jq\fP\fIlon0/scale\fP (Equidistant Cylindrical Projection (Plate Carree))
+.br
+\fB\-Jt\fP\fIlon0/scale\fP (TM - Transverse Mercator, with Equator as y = 0)
+.br
+\fB\-Jt\fP\fIlon0/lat0/scale\fP (TM - Transverse Mercator, set origin)
+.br
+\fB\-Ju\fP\fIzone/scale\fP (UTM - Universal Transverse Mercator)
+.br
+\fB\-Jy\fP\fIlon0/lats/scale\fP (Basic Cylindrical Projection)
+.br
+.sp
+\fBAZIMUTHAL PROJECTIONS:\fP
+.br
+.sp
+\fB\-Ja\fP\fIlon0/lat0/scale\fP (Lambert).
+.br
+\fB\-Je\fP\fIlon0/lat0/scale\fP (Equidistant).
+.br
+\fB\-Jf\fP\fIlon0/lat0/horizon/scale\fP (Gnomonic).
+.br
+\fB\-Jg\fP\fIlon0/lat0/scale\fP (Orthographic).
+.br
+\fB\-Js\fP\fIlon0/lat0/\fP[\fIslat/\fP]\fIscale\fP (General Stereographic)
+.br
+.sp
+\fBCONIC PROJECTIONS:\fP
+.br
+.sp
+\fB\-Jb\fP\fIlon0/lat0/lat1/lat2/scale\fP (Albers)
+.br
+\fB\-Jd\fP\fIlon0/lat0/lat1/lat2/scale\fP (Equidistant)
+.br
+\fB\-Jl\fP\fIlon0/lat0/lat1/lat2/scale\fP (Lambert)
+.br
+.sp
+\fBMISCELLANEOUS PROJECTIONS:\fP
+.br
+.sp
+\fB\-Jh\fP\fIlon0/scale\fP (Hammer)
+.br
+\fB\-Ji\fP\fIlon0/scale\fP (Sinusoidal)
+.br
+\fB\-Jk\fP[\fBf|s\fP]\fIlon0/scale\fP (Eckert IV (f) and VI (s))
+.br
+\fB\-Jn\fP\fIlon0/scale\fP (Robinson)
+.br
+\fB\-Jr\fP\fIlon0/scale\fP (Winkel Tripel)
+.br
+\fB\-Jv\fP\fIlon0/scale\fP (Van der Grinten)
+.br
+\fB\-Jw\fP\fIlon0/scale\fP (Mollweide)
+.br
+.sp
+\fBNON-GEOGRAPHICAL PROJECTIONS:\fP
+.br
+.sp
+\fB\-Jp\fP[\fBa\fP]\fIscale\fP[\fI/origin\fP] (polar (theta,r) coordinates, optional \fBa\fP for azimuths and offset theta [0])
+.br
+\fB\-Jx\fP\fIx-scale\fP[\fBl|p\fP\fIpow\fP][\fI/y-scale\fP[\fBl|p\fP\fIpow\fP]] (Linear, log, and power scaling)
+.br
+More details can be found in the \fBpsbasemap\fP manpages.
+.br
+.SH OPTIONS
+No space between the option flag and the associated arguments.
+.TP
+.B \-A
+Means grdfiles have polar (r, theta) components instead of Cartesian (x, y).
+.TP
+.B \-B
+Sets map boundary tickmark intervals. See \fBpsbasemap\fP for details.
+.TP
+.B \-E
+Center vectors on grid nodes [Default draws from grid node].
+.TP
+.B \-I
+Only plot vectors at nodes every \fIx_inc, y_inc\fP apart (must be multiples of
+original grid spacing). Append \fBm\fP for minutes or \fBc\fP for seconds. [Default plots every node].
+.TP
+.B \-K
+More \fIPostScript\fP code will be appended later [Default terminates the plot system].
+.TP
+.B \-N
+Do NOT clip vectors at map boundaries [Default will clip].
+.TP
+.B \-O
+Selects Overlay plot mode [Default initializes a new plot system].
+.TP
+.B \-P
+Selects Portrait plotting mode [\fBGMT\fP Default is Landscape, see gmtdefaults to change this].
+.TP
+.B \-Q
+Select barb plot. Optionally, specify \fIparameters\fP which
+are \fIbarbwidth/barblength/barbangle/barbscale\fP [Default is 0.1\fBi\fP/0.2\fBi\fP/120/5]. 
+.TP
+.B \-R
+\fIwest, east, south,\fP and \fInorth\fP specify the Region of interest. To specify boundaries
+in degrees and minutes [and seconds], use the dd:mm[:ss] format. Append \fBr\fP if lower left and upper right
+map coordinates are given instead of wesn.
+Specify a subset of the grid.
+.TP
+.B \-T
+Means azimuth should be converted to angles based on the selected map projection.
+.TP
+.B \-U
+Draw Unix System time stamp on plot. User may specify where the lower left corner
+of the stamp should fall on the page relative to lower left corner of plot. Optionally,
+append a label, or \fBc\fP (which will plot the command string.). The GMT parameters
+UNIX_TIME and UNIX_TIME_POS can affect the appearance; see the \fBgmtdefaults\fP man
+page for details.
+.TP
+.B \-V
+Selects verbose mode, which will send progress reports to stderr [Default runs "silently"].
+.TP
+.B \-W
+Set pen attributes used for vector outlines [Default: width = 1, color = 0/0/0, texture = solid].
+.TP
+.B \-X \-Y
+Shift origin of plot by (\fIx-shift,y-shift\fP).
+Prepend \fBa\fP for absolute coordinates;
+the default (\fBr\fP) will reset plot origin.
+.TP
+.B \-Z
+Means the angles provided are azimuths rather than direction (requires \fB\-A\fP).
+.TP
+.B \-c
+Specifies the number of plot copies. [Default is 1]
+.SH EXAMPLES
+To draw the vector field given by the files r.grd and theta.grd on a linear plot
+with scale 5 cm per data unit,
+using vector rather than stick plot, and scale vector magnitudes so that 10 units
+equal 1 inch, try
+.br
+.sp
+grdvector r.grd theta.grd \fB\-Jx\fP5\fBc\fP \fB\-Q\fP \fB\-S\fP10\fBi\fP > gradient.ps
+.br
+.sp
+.SH "SEE ALSO"
+.IR gmt (l),
+.IR grdcontour (l),
+.IR psxy (l)
diff -uNr GMT3.4.2.orig/man/manl/psxy.l GMT3.4.2/man/manl/psxy.l
--- GMT3.4.2.orig/man/manl/psxy.l	Thu Oct  3 02:25:53 2002
+++ GMT3.4.2/man/manl/psxy.l	Thu Feb 13 18:03:43 2003
@@ -225,6 +225,16 @@
 .B \-Sp
 \fBp\fPoint. No size needs to be specified (1 pixel is used).
 .TP
+.B \-Sr
+\fBw\fPind barb. Direction (in degrees counter-clockwise from horizontal) and length must be found in columns 3 and 4. \fIsize\fP,
+if present, will be interpreted as barbwidth/barblength/barbangle/barbscale [Default is 0.1\fBi\fP/0.2\fBi\fP/120/5].
+.TP
+.B \-SR
+Same as \fB\-Sr\fP, except azimuth (in degrees east of north) should be given instead of direction. The azimuth will
+be mapped into an angle based on the chosen map projection (\fB\-Sr\fP leaves the directions
+unchanged.)
+.TP
+.B \-Ss
 .B \-Ss
 \fBs\fPquare. \fIsize\fP is diameter of circumscribing circle.
 .TP